Wayne
Member
Registered: 19th May 04
Location: Haslingden, Lancashire
User status: Offline
|
on the early dizzy type meters theres like a screw next to the plug on the meter itself, what does this do? Ive messed about with it and it seems to control how the engine idles is this rite? How should it be set up? Thanks
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
I was told not to touch them but i may have been told wrong
|
Ellis
Member
Registered: 11th Sep 07
Location: Aberdeenshire
User status: Offline
|
I used to just play about with it on my mates XE until the idle was right, I'm guessing it just alters the amount of intake air
|
Wayne
Member
Registered: 19th May 04
Location: Haslingden, Lancashire
User status: Offline
|
is it better to do it when you first start the engine from cold? Cheers
|
Torsa g
Member
Registered: 20th Sep 07
Location: Tamworth. Rides: An OSTRIDGE
User status: Offline
|
warm!!!!
|
Wayne
Member
Registered: 19th May 04
Location: Haslingden, Lancashire
User status: Offline
|
and how should it be set? Dead on idleing at 1000rpm or just below? Cheers
|
Ellis
Member
Registered: 11th Sep 07
Location: Aberdeenshire
User status: Offline
|
About 900 rpm i would say
|
Wayne
Member
Registered: 19th May 04
Location: Haslingden, Lancashire
User status: Offline
|
ok cheers will have a go at this when i get home.
|
SportBoy
Member
Registered: 5th Oct 01
Location: Retford, Nottinghamshire
User status: Offline
|
it will alter the mixture
|
p16vlv
Member
Registered: 15th Jun 02
Location: rossendale
User status: Offline
|
wayne, you need a emissions tester when adjusting it. if you need to try another one iv got a couple of spares you can have
|
Wayne
Member
Registered: 19th May 04
Location: Haslingden, Lancashire
User status: Offline
|
laurance it's turning out to be a nightmare this engine, i cant get that screw rite. Just tried ringing you, i've got to go over to burnley tomorrow so i can call into your work and pick them up if it's ok? Cheers
|