Dan Lewis
Member
Registered: 31st Jan 05
Location: Leicestershire
User status: Offline
|
When doing boost pipes is it better to have the minimum amount of silicon hoses and more metal pipes or dont it really matter?
Also will adding a larger FMIC reduce boost pressure?
Thanks
|
Dan Lewis
Member
Registered: 31st Jan 05
Location: Leicestershire
User status: Offline
|
Also is the only way to make a dump valve quieter is to get a recirc? or can i do something to the dump valve as its really loud and not very pleasant
|
Torsa g
Member
Registered: 20th Sep 07
Location: Tamworth. Rides: An OSTRIDGE
User status: Offline
|
the more solid the pipe work the better as you will reduce the flex in the boost range, fitting a bigger intercooler to the car will give it more lag as the turbo will have to fill the bigger ic to gain pressure, upgrade intercooler with the size of your turbo as it will gain pressure alot quicker
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
I know its not really teh subject in question but as we are on the subject of boost: pressure isnt everything, higher boost doesnt mean more power, you run run a smaller turbo at a higher pressure but get a hell of alot more power from a bigger turbo at a lower pressure because the bigger turbo will flow more air at a lower pressure.
|
Torsa g
Member
Registered: 20th Sep 07
Location: Tamworth. Rides: An OSTRIDGE
User status: Offline
|
quote: Originally posted by DaveyLC
I know its not really teh subject in question but as we are on the subject of boost: pressure isnt everything, higher boost doesnt mean more power, you run run a smaller turbo at a higher pressure but get a hell of alot more power from a bigger turbo at a lower pressure because the bigger turbo will flow more air at a lower pressure.
Also will save alot of strain and praps save money on getin recons all the time
|
Dan Lewis
Member
Registered: 31st Jan 05
Location: Leicestershire
User status: Offline
|
well it was running at just under 1 bar when on full boost i have put the new intercooler on and the runs slightly lower boost now. I have a t28 turbo.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
quote: Originally posted by DaveyLC
I know its not really teh subject in question but as we are on the subject of boost: pressure isnt everything, higher boost doesnt mean more power, you run run a smaller turbo at a higher pressure but get a hell of alot more power from a bigger turbo at a lower pressure because the bigger turbo will flow more air at a lower pressure.
also lower boost on bigger turbo = less heat.
although to add to what you are saying, say you run a smaller turbo to make say 350bhp. it will be far less laggy than a bigger turbo running less pressure to make the same power. if anything, keeping the smaller turbo would essentially be better to drive the car with.
|
Dan Lewis
Member
Registered: 31st Jan 05
Location: Leicestershire
User status: Offline
|
found out i had a small leak where i hadnt tighted up a clip proply all sorted now and boosting to just under 1 bar woo
|