XozziDK
Member
Registered: 2nd Sep 09
Location: Denmark
User status: Offline
|
What modifications should I do to let me car go higher in the revs... I'm soon getting the car chipped, but I dont want to raise the revlimit before I'm sure the car can take it.
So how much should I do to raise the limit to 7500? 8000? and maybe more?
|
Kevxx
Member
Registered: 14th May 08
Location: Forfar, Angus
User status: Offline
|
You could raise it to 7,000 standard.
I'd look at ARP rod bolts for 7,500, maybe balance you're bottom end.
More revs are pointless so i'm led to believe.
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
how bigs ya wallet.
7.5k fit arps.
after that steel rods/pistons but looking at £800 minimum just on parts
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
abd state the crank can take up to 10k and the rods 8k
only reason for changing the rev limit is when you fit a powerbox as you will get the most out of it.
best bet is ARP bolts and raise the limmit to 7.5k
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
i cant see sbd claiming the stock crank is good for 10k, even if they did i know i wouldnt want too
|