curtoise
Member
Registered: 20th Jan 10
Location: cambridge/ essex
User status: Offline
|
right, it all began when i was sitting in a carpark with some friends and my car started missing badly..
i had a set of new plugs in the car with me so i thought i may aswell change them there as i had the tools with me..
so i change number 1, 3 and 4 but number 2 was VERY tight, i finally got it out to find the ceramic was smashed to shit on the plug. looked into the cylinder with a torch, and there was some sitting on the piston (F*CK)
i had no hoover in the car and needed to get home for work in the morning.
so i left the plug out, and took all the ht leeds of and turned it over on the motor to try and fire some out, this worked abit and some fired out the top, to i put it all back together and started it, and all hell broke loose, it was making the worse sound ever, and missing badly, it died about 3 times and i thought oh shit, its going home on a trailer... but i got it running and sat it at 3000rpm in a attempt to clear it out,
it worked but there is smoke pouring out of the back,
its using oil but the coolant is fine.
now (3 days later) its running perfect but smoking badly, and when i lift off at high rpm it backfires and shoots flames out of the exhaust......
what do you think has happend? piston ring? scored bore? oil stem seal? im at a loss at the moment
and am considering puting a 1.8 in it....
any help is greatly appreciated
cheers
curt.
|
mike56gte
Member
Registered: 23rd Jun 09
Location: Fife, scotland Drives: Audi S3
User status: Offline
|
could of put a big score in the bore. oil stem seals wouldnt just go like.
|
curtoise
Member
Registered: 20th Jan 10
Location: cambridge/ essex
User status: Offline
|
oh dear, rebore or new block then, either way expencive
|
tigra-tb
Member
Registered: 26th May 06
Location: stoke on trent
User status: Offline
|
get a magnet down ya plug hole to get it out, but sounds to me like your piston has smashed ya plug, have ya had ya head skimmed recently?
|
curtoise
Member
Registered: 20th Jan 10
Location: cambridge/ essex
User status: Offline
|
nah its the ceramic thats in the bore... no metal lol. the piston then mashed up the ceramic. nah it hasnt been skimmed recently
|
tigra-tb
Member
Registered: 26th May 06
Location: stoke on trent
User status: Offline
|
try a bit of bluetak on on a philips screwdriver then m8y then get to a garage who have a camara to see what damage it has done if any? or a small light n a small mirror n check it yourself
|
curtoise
Member
Registered: 20th Jan 10
Location: cambridge/ essex
User status: Offline
|
yh i need to get hold of some tools. all the ceramic has gone now, its just using oil loads
|
p16vlv
Member
Registered: 15th Jun 02
Location: rossendale
User status: Offline
|
you could have got some chewing gum. put that on a screwdriver and got it out
|
curtoise
Member
Registered: 20th Jan 10
Location: cambridge/ essex
User status: Offline
|
but then the gun could have fallen in the bore lol.....
and it went around to the side of the piston not just the middle
|