tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
Hey all not long after i got the car i took the bumpers and arches off to get sprayed , i put the, all bk on and for a while now iv beem trying to get rid of the gap between the passenger side headlight and the bumper, all the bolts are in and solid bu it just dont want to be pulled up and sugestions ? Let me no cheers
|
Phillips_91
Member
Registered: 20th Jan 10
Location: Blackpool. Drives: Sapphire Black Mk4 Astra 1.8
User status: Offline
|
u got any pics mate.. pics may be a good help on this one... i had a similar problem when i took my bumpers off but mine was with morettes so i thought it was the lights, try takin the lights out with bumper still in place then put headlights back in,,, sounds daft but it worked for me (Y) let me know how it goes 
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
Lol ill try it whem iv put the lights back together mate and ill try and get some pics up aswell
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
Pics up soon
|
Phillips_91
Member
Registered: 20th Jan 10
Location: Blackpool. Drives: Sapphire Black Mk4 Astra 1.8
User status: Offline
|
still not sorted i take it?
|
Alex191
Member
Registered: 15th Jun 09
Location: devon
User status: Offline
|
mines the same  it had a gap but then it got fixed somehow, but then i had a little bump and it hangs low again! grr
|
Phillips_91
Member
Registered: 20th Jan 10
Location: Blackpool. Drives: Sapphire Black Mk4 Astra 1.8
User status: Offline
|
the only panel gap problem im having at the moment is the sides of the front bumber where the plastic clips are both sides keep popping out think i might see vaux about getting new clips all round as headlight ones and bumper ones arnt actually screwing the bolts in they just kinda sit there :/
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
no still not sorted havent had time to get pics but will soon, and mine is the same its the cornner of the bumper were the light sits, i can push it up but there isent anything i can use to hold it up if you get what i mean , all the screws are in so havent got a clue tbh
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
|
shaunmods
Premium Member
Registered: 12th Mar 07
Location: Glascote, Staffordshire
User status: Offline
|
My GSI bumper is exactly the same as that on the P/S Does my head in! If you find a way of getting rid of it let me know lol
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
nice one mate its doing my head in to, just makes the hole car look bad i think so rely wanna get it sorted let me no then mate
|
chris1990smith
Member
Registered: 3rd Mar 10
Location: Walker, Newcastle
User status: Offline
|
From my experience of fitting wings there are two bolts that sit behind the bumper if you slacken them and the two nearest the headlight along the top you should be able to adjust that gap. If you can't get enough movement out of that slacken them all so that they are tight but you can still move the wing about. With a bit of persistence you will have it looking right in no time.
|
chris1990smith
Member
Registered: 3rd Mar 10
Location: Walker, Newcastle
User status: Offline
|
Also just seen the date
|
