corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
Hey, sorry about number of help posts...
Just fitted front coilies.. im pretty new to all this.. anyway got the fronts fitted no problem what so ever!
However my cesaros are touching the coil on the inside tyre wall.. see picture below!
Would it be a case that just i am running 195 / 45 on 15's and should drop to 175? 185s? on the fronts?
|
Eddx14xe
Member
Registered: 12th Jan 10
Location: Hertfordshire
User status: Offline
|
Have you tried using camber adjusting bolts?
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
Camber bolts might help but normally its best to run a small spacer, Unfortunately its all you can do really.
|
corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
Its on both sides where the camber is almost perfect!
One side was really negative i admit but we had a fiddle and still the same
|
corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
quote: Originally posted by AW06
Camber bolts might help but normally its best to run a small spacer, Unfortunately its all you can do really.
Where would the spacer go exactly!?
|
Eddx14xe
Member
Registered: 12th Jan 10
Location: Hertfordshire
User status: Offline
|
quote: Originally posted by corsayoung
quote: Originally posted by AW06
Camber bolts might help but normally its best to run a small spacer, Unfortunately its all you can do really.
Where would the spacer go exactly!?
Sit between the wheel and hub to bring the wheel away from the shock slightly, you can get them from halfords etc
|
sri_baby
Member
Registered: 17th Feb 08
User status: Offline
|
what about spacers mayb 5 mm
|
corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
Hmm would i need to buy slightly longer bolts then too?
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
No, for 5mm spacers your standard wheel bolts with be fine. I have done this.
|
corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
quote: Originally posted by Scotty C
No, for 5mm spacers your standard wheel bolts with be fine. I have done this.
Sweeet.. so this is most defo likely to work?! You running 195's too then?
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
It will work. Yeh, 195's
|
corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
Sweet.. thanks for the help! will update tomorrow!
|
corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
Ok so little update on postion..
I got the 5mm spacers.. the left hand alloy now is fine.. no rubbing a few mm space on the tyre wall.. the right hand side is still touching!
Could this just be down to camber?
|
phil_fcuk
Member
Registered: 25th Apr 08
User status: Offline
|
used to have this problem on my corsa. i had to put the car heigher by about 20mm and it sorted the problem out.
|
biswell
Member
Registered: 2nd Jun 09
Location: Watford
User status: Offline
|
what coilovers are they if there fk's there should be a elongated hle to adjust the camber bit of a pig to get right
|
corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
yea they are fk's.. thats what was asking if it was just the camber
Gunna have a bash tomorrow then in the morning
|
biswell
Member
Registered: 2nd Jun 09
Location: Watford
User status: Offline
|
i had to mess around with my camber aswell as the 5mm spacer to make mine fit
|
corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
quote: Originally posted by biswell
i had to mess around with my camber aswell as the 5mm spacer to make mine fit
did you have 15" running 195's too then?
|
Fro
Member
Registered: 20th Jun 06
Location: Rainham, Essex Drives: A3 2.0TDi Sport
User status: Offline
|
Had to loosen the two hub bolts and pull it out slightly on my mates.
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
Just take it to a tyre/exhaust place and get the camber/track done properly. I had to when I fitted my coilovers as my camber was way out
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
As Scotty C says, you'll need the tracking and camber checked. Would be quite unlikely that it's perfect from fitting them by eye.
|
corsayoung
Member
Registered: 10th Feb 09
Location: Cheltenham
User status: Offline
|
quote: Originally posted by alan-g-w
As Scotty C says, you'll need the tracking and camber checked. Would be quite unlikely that it's perfect from fitting them by eye.
Oh yea don't worry I'm getting tracking done on both front and rear as soon as it's done.
But I can't get to the place if the tyre is rubbing
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
Bodge it just to get u there.
|
biswell
Member
Registered: 2nd Jun 09
Location: Watford
User status: Offline
|
quote: Originally posted by corsayoung
quote: Originally posted by biswell
i had to mess around with my camber aswell as the 5mm spacer to make mine fit
did you have 15" running 195's too then?
yh mate have got 15's with 195's on mine
|