Makarus
Member
Registered: 25th Jun 02
Location: Nottingham/Derbyshire Boarder.
User status: Offline
|
Along with my tyres my brakes have come to the point where they need changing.
I have a 1.2 8v 1997 post face lift Corsa. I have 15" TSW's so I have the space to fit the brakes in.
What I am planning on doing is getting the calipers from down a scrappy and then putting some decent disks and pads on at the same time as putting the calipers on. Do I need anything really apart from disks, pads and calipers?? I am quite sure the 2.0 16V setup of brakes fits to the same hub as I have, so I think I just need pads, disks and calipers but I want to make sure before I spunk all my spare cash on them.
Cheers,
Sean.
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Online
|
You may also need to space the caliper out slightly.
|
Makarus
Member
Registered: 25th Jun 02
Location: Nottingham/Derbyshire Boarder.
User status: Offline
|
Is that a big job, I will hopefully be doing the conversion myself, shouldnt be too difficult I wouldnt think.
|
DanielJ
Member
Registered: 21st Nov 01
Location: gwent, south wales
User status: Offline
|
piece of piss m8 can get u pics of mine if needed
|
Miner
Member
Registered: 28th Aug 02
Location: Ayrshire,Drives: Corsa 12v & CBR600Sport
User status: Offline
|
Bolt off, bolt new ones on! Doddle! Uses same bolts, buy new washers for the brake pipe unions as they only cost pennies. Best £50 I've spent yet!
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
have u any pics
tell us ow its done?
coz my disks are not vented i got boggo brakes and im gunna fit some ate calipers
could u list what i need?
cheers
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
quote:
Originally posted by Adam-D
have u any pics
tell us ow its done?
coz my disks are not vented i got boggo brakes and im gunna fit some ate calipers
could u list what i need?
cheers
calipers, discs, pad.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
nothing specil i need?
they bolt straight on?
cool
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
straight on
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
thank you
|
and-m
Member
Registered: 5th May 02
Location: Liverpool. Drives. Skud vRS.
User status: Offline
|
the only prob is the car at the scrappy may have been sat for ages and the calipers could be seized, probably worth getting a new seal kit.
Piccie here
Basically jack car up/take wheel off, clamp brake line, undo old calipers with I think is a 10mm allen bolt top and bottom, undo brake hose, pull of caliper, unscrew disk, pop that off, give hub face a clean, grease and the reverse for the new ones, bleeding etc
[Edited on 18-08-2003 by and-m]
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
cool
ill be doin that then
with a new seal kit
|
and-m
Member
Registered: 5th May 02
Location: Liverpool. Drives. Skud vRS.
User status: Offline
|
I also renewed the caliper to hub bolts, pads (have to reallt) disks were practically brand new, renewed the copper washers, bleed nipples and the sliders.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
i need sooooooo much money
|
and-m
Member
Registered: 5th May 02
Location: Liverpool. Drives. Skud vRS.
User status: Offline
|
The brakes all in cost me less than £100 quid, well worth it, it come of the rollers today at the MOT 
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
how du u mean?
|
Adam_B
Member
Registered: 13th Dec 00
Location: Lancashire
User status: Offline
|
My 2.0 16v brakes, and my mums very posh carpeted garage  -
There not massive but they stop good enuff
|
Makarus
Member
Registered: 25th Jun 02
Location: Nottingham/Derbyshire Boarder.
User status: Offline
|
Nice mate, very nice. Definatly need to sort it out, may wait till I can afford some grooved disks and sorted pads at the same ti9me as the calipers.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
love those
|
Adam_B
Member
Registered: 13th Dec 00
Location: Lancashire
User status: Offline
|
On the top pic u can see where i got pissed off trying to get the rusty old discs off and ended up belting the centre cap thingy a few times, oops
|
and-m
Member
Registered: 5th May 02
Location: Liverpool. Drives. Skud vRS.
User status: Offline
|
quote:
Originally posted by Adam-D
how du u mean?
They have a rolling road (powered at the MOT) and get you to test the brakes (I was still on car - its a Council MOT place, the car popped off the road, mustve pressed too hard 
|
moddedcorsa
Member
Registered: 15th Aug 02
Location: Argyll, West scotland
User status: Offline
|
how much is a new seal kit? tried askin at vaux but they didnt know, had 2 phone up sumwhere for a price, took ages, and i was in a rush, so couldnt wait
|
jjcymru
Member
Registered: 28th May 02
Location: ammanford,south wales
User status: Offline
|
pulled mine of a calibra breaking in the free-ads for £20 a pair of callipers, the discs and pads are in v good nick too! Bargain!
|
Makarus
Member
Registered: 25th Jun 02
Location: Nottingham/Derbyshire Boarder.
User status: Offline
|
Just got the set, disks, calipers and pads for £30 from a guy in Nottingham that I met on MIG. SOrted it all, putting them on today hopefully.
|
avenger
Member
Registered: 2nd May 01
Location: Preston
User status: Offline
|
mine had calibra brakes as standard
hang on.. thats cause its a calibra
damn wonder where i can get bigger stoppers? got some front disks, just need better calipers and some braded hoses i think
|
