M4tt
Member
Registered: 18th Apr 03
Location: Potters Bar
User status: Offline
|
what do they sound like on a 1.4 16v\1.6 16v?
full sys (cat back) ?
im thinking of getting one with the smaller oval tail pipe.
im looking for something that is noticable, but not too noisy, and something that will show off the characteristic of the 1400/1600 16v engine note
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
I got the magnex 3 x 5 oval it sounds real nice on my GSI not too loud
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
I see one of those 5x3's the other day on a corsa.
Opinion, i like it better than my 6x4. Looks good, not too big.
As for noise on the 6x4, dont' expect mind boggling roooaaarrr, as it doesn't do that at all. You can hear its on the car, but its noisest under de-acceleration when it gives a nice deep drone around 4 down to 2k rpm.
Plus magnex build quality is great. I'd deffo consider a 5x3 too.
|
Juni0r
Member
Registered: 17th Jan 03
Location: Hants
User status: Offline
|
The 3 x 5 is def the one it go for.
Not to loud and not in ya face!!
Mine make a nice burblin sound and the occ poppin.
|
Juni0r
Member
Registered: 17th Jan 03
Location: Hants
User status: Offline
|
Ooops shit pic!!
|
IntaCepta
Member
Registered: 25th Mar 02
Location: Mill Hill East, Greater London
User status: Offline
|
yea, i got the normal 3" R tail (catback).
Does enough for me, nice deep tone / burble. Not too loud as well.
|
p4ult
Member
Registered: 1st Apr 02
Location: Chadwell Heath, Essex
User status: Offline
|
I have a cat-dack 5x3 oval, and would have to agree with all of the above, deff get 1
|
M4tt
Member
Registered: 18th Apr 03
Location: Potters Bar
User status: Offline
|
thanks every1 , that's my nect mod then
it ain't gonna bang on my rear axel is it
cause i've got a powershite backbox and it bangs around a lot, plus the box is falling to pieces inside. i don't trust them to make me a decent back box so im not gonna take it back....
|
M4tt
Member
Registered: 18th Apr 03
Location: Potters Bar
User status: Offline
|
n e one know of n e cheap places to buy the system?
or am i better off going somewhere like R-tech?
|
M180SRI
Member
Registered: 2nd Sep 03
Location: N.Finchley
User status: Offline
|
i went powerflow A1 n got a letta bakbox, sounds da bolloks but fallin 2 pieces u got same 1??
|
M4tt
Member
Registered: 18th Apr 03
Location: Potters Bar
User status: Offline
|
yeah mate, i got the letterbox too! i went to the A1 in queensbury. same place?
|
Wolf In Welsh Clothing
Member
Registered: 31st Mar 03
Location: North Wales...... Cooper S on order
User status: Offline
|
Mine knocked on the axel cos the mupped put the clamp on the wrong way round.
Sounds nice, only got a standard centre section 2!
|
Juni0r
Member
Registered: 17th Jan 03
Location: Hants
User status: Offline
|
If it knocks or is two low then just change the rubbers!! If its to low then Vectra rubbers can lift it up a bit!
|
Gambit
Member
Registered: 5th Jun 00
Location: Common Sense HQ
User status: Offline
|
the large oval is to what a DTM exhaust was a few years back, every cúnt has on their car
|