MoNkEy MaGiC
Member
Registered: 12th Apr 03
Location: West - London Drives: Corsa GSi
User status: Offline
|
i think my cars idle control valve is blocked coz the revs have gone crazy!!!
but im not sure wat the idle control valve is and how to check or repair it???
can someone help me out?
|
drunkenfool
Member
Registered: 7th Feb 03
Location: Hereford Drives: Audi R8 V8
User status: Offline
|
its in the throttle body assembly i think, before the head.
|
miles
Member
Registered: 25th Mar 02
Location: plymouth Drives: Astra Sport
User status: Offline
|
Assuming this is a 1.4/1.6 16v.
Its on the side of the throttle body, on the right hand side of the engine. 2 torx bolts hold it in, it has a 4 pin connector on it.
|
MoNkEy MaGiC
Member
Registered: 12th Apr 03
Location: West - London Drives: Corsa GSi
User status: Offline
|
yes, its a Corsa B Gsi C16XE.
wat does it look like? how can i check its running ok???
cheers guys
|
big eck
Member
Registered: 20th Apr 03
Location: Tullibody. Drives - Audi B8 S4 & Fiesta Zetec-S
User status: Offline
|
Where is it on the 20XE engine???
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
its a bit of an arse to get to , undo your header tank and more it to one side, first remove ya battery to gain more space, you should see the throttle body now, remove the fuel inlet and outlet thats connected to the fuel rail and if ya lucky you might be able to remove it now, its on the side of the throttle body, if not you gotta remove the top of the inlet manifold!!!!.
If its ya TPS then thats worse cos this sensor is under the idle control valve and its a big job
|
miles
Member
Registered: 25th Mar 02
Location: plymouth Drives: Astra Sport
User status: Offline
|
haha, it wasn't that hard to get to in my nova!
Its a small black cylinder about 4cm diameter, about 4cm high. When you take it out it has a small shaft with what looks like a spring around it.
C20XE has a different design, its in a breather pipe behind the bottom of the inlet manifold, its a silver cylinder about 3" long with about 1" diameter.
|
CORSALUVA
Member
Registered: 6th Nov 01
Location: MANCHESTER
User status: Offline
|
any one know where it is on a 1.2 8v cause i keep gettin fault code comin up saying theres a problem with the idle air control code 35 i think.
|