dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
Went to start the car this morning and it wont start. Thought it might have been the starter motor so replaced that with a spare I had and still no luck.
Its turning over but not firing up. I have spark in all 4, and the fuel pump is priming when its being turned over so I guess that its got fuel aswell.
And ideas as to what it could be?
|
swill_omnibus
Member
Registered: 12th Dec 07
Location: : S. wales Drives: Dodge Caliber
User status: Offline
|
Crank sensor? Flywheel Sensor?
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
Dont think its a sensor because I have spark. Going to check the timing tomorrow.
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
Timing is fine, changed the crank and cam sensors aswell and still wont start
|
barneykarl
Member
Registered: 29th Jul 06
Location: Stevenage
User status: Offline
|
What engine ?, if you have spark on all plugs then it has to be lack of fuel/ air or no compression I guess.
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
C16xe, anything I can do to test/ rule things out?
|
barneykarl
Member
Registered: 29th Jul 06
Location: Stevenage
User status: Offline
|
check you are getting fuel in the rail / injectors, do compression test, are injectors getting pulse from ecu, is fuel ok and not contaminated moisture ,immobilizer problem maybe, shine torch into pots to make sure not flooded, all I can think of at the moment.
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
How do I check for fuel? New fuel went in today aswell and its not an imobilizer
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
Done a bit of reading about and is it true that when the ignition is tuned on the fuel pump should make a noise or when its being turned over? When I turn my ignition on it makes no noise...so im thinking relay, fuse or fuel pump itself.
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
Done a paper clip test and got crank angle sensor but i changed that yesterday to one off my old engine that was working when removed. Any ideas?
[Edited on 21-12-2009 by dean101287]
|