djmattyh
Member
Registered: 20th May 08
Location: Shropshire Drives: 1.6 corsa sport
User status: Offline
|
How hard is it? do i have to get a new pulley? advice please  oh and its an s reg 1.6sport
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
this is something i keep wanting to do on my car, i know lots of stuff gets ditched and think you need a shorter aux belt afterwards
|
Jamxe
Member
Registered: 26th Nov 08
Location: Ireland
User status: Offline
|
My car is having an overhaul at the moment and I'm taking the a/c out as the previous owner had the rad changed for a regular one so it doesnt work.. As far as I can see, ditch all the pipes, new engine mount for non a/c models and a new aux belt is whats needed...
|
john_c20xe
Member
Registered: 10th Feb 08
Location: Eastbourne, EastSussex
User status: Offline
|
dont take it out just dont turn it on, it has a clutch on the pump so ive you dont turn it on it wont cut in
|
djmattyh
Member
Registered: 20th May 08
Location: Shropshire Drives: 1.6 corsa sport
User status: Offline
|
i want to take it out to save a bit of weight and to get a bit more air to my rad
|
dafs
Member
Registered: 15th Jan 09
Location: Bryngwran, Isle of Anglesey
User status: Offline
|
just finished doing this 2 nite and i aint got the non air con engine mount 
|
Rybo
Member
Registered: 6th Mar 08
Location: Cumbria
User status: Offline
|
you need a full new mount (1.4 sports are common with pas and no a/c) look for one with a sunroof in a scrappy as they dont really have a/c, you need to take the scuttle off and glove box to get everything out, then blank some big holes up behind the glove box/under the scuttle, its easier than it sounds tbh
|
dafs
Member
Registered: 15th Jan 09
Location: Bryngwran, Isle of Anglesey
User status: Offline
|
I've done all that also and like u say it aint really that hard 2 do, is the engine mount part of a/c pump mount then ? Cos i took bout 6 bolts out of the pump and it was still solid grr lol
|
Rybo
Member
Registered: 6th Mar 08
Location: Cumbria
User status: Offline
|
yeah sadly it is
|
dafs
Member
Registered: 15th Jan 09
Location: Bryngwran, Isle of Anglesey
User status: Offline
|
Nice 1 thanks mate :-)
|
djmattyh
Member
Registered: 20th May 08
Location: Shropshire Drives: 1.6 corsa sport
User status: Offline
|
is it possible to take it all out and leave the belt and pump in? how hard is it to change the engine mount?
|
djmattyh
Member
Registered: 20th May 08
Location: Shropshire Drives: 1.6 corsa sport
User status: Offline
|
Anyone?
|
djmattyh
Member
Registered: 20th May 08
Location: Shropshire Drives: 1.6 corsa sport
User status: Offline
|
Bump
|
Rybo
Member
Registered: 6th Mar 08
Location: Cumbria
User status: Offline
|
yeah, but to me thats half a job...your car though
|
djmattyh
Member
Registered: 20th May 08
Location: Shropshire Drives: 1.6 corsa sport
User status: Offline
|
Thanks the main reason for removing it is so i can get a bigger glovebox, save a bit of weight & so my rad gets a bit more cold air to it.
|
dafs
Member
Registered: 15th Jan 09
Location: Bryngwran, Isle of Anglesey
User status: Offline
|
sounds like my reason also lol i've got a sxi glove box and heater pannel under the scuttle, i;ve just gaffa taped the 3 holes 4 now till i get some steel 2 pop rivet in place and then seal round the edges 2 water proof it
|
matt_1.416v
Member
Registered: 18th Feb 10
Location: Bristol
User status: Offline
|
ive taken the a/c out of my car and didnt have to take the mount off or change it i just ran the belt across the pulleys a different way but you defo need a new belt, measure the distance around the pulleys with a piece of string and go to your nearest motorman/halfords and they can get the right size belt for u, i think the belt i used was PK6 1258. around that size. hope this helps
matt
|
