Greg_M
Member
Registered: 2nd Sep 03
Location: Grantham, Lincolnshire
User status: Offline
|
I managed to fry my ignition live on the way back from PVS, the wire just burnt itself out. Dostny seem to have done too much damaged, only to a few of the surounding wire.
Will this have been due to the wire being thin guage as it the live from the 12v?
Or are there any other likly causes?
|
willay
Moderator
Organiser: South East, National Events
Premium Member
Registered: 10th Nov 02
Location: Roydon, Essex
User status: Offline
|
I havent got the anwser to your question, but what I did with my live I belive is fed it into the cabin through the drivers side loom hole and wired it up there to a ign live!
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
you want a decent gauge cable there, sure it hasn't shorted?
|
mattievRS
Member
Registered: 20th May 06
Location: Leicester
User status: Offline
|
quote:
Originally posted by Rileysport
you want a decent gauge cable there, sure it hasn't shorted?
Agreed you need a guage wire that can take 12v minimum and have you checked to see if the ignition earth is ok cause if its loose or damaged it will cause the +ve to overload and fry itself!!
|
