mrmattholmes
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 28th Sep 06
Location: Thirsk,North Yorkshire,UK
User status: Offline
|
done a few engine conversions before i know i will need-
engine,gearbox,ecu,loom and chip
and i think i will need-
driveshafts? engine mounts? fuel pump?
is this right?
thanks
|
Richie B
Member
Registered: 18th Apr 04
Location: Newcastle
User status: Offline
|
If you have everything from the 1.4 (as in hubs, struts etc as well) then you don't need much. Mounts from the 1.2, will need a fuel pump, and speedo is driven differently too.
|
mrmattholmes
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 28th Sep 06
Location: Thirsk,North Yorkshire,UK
User status: Offline
|
no i dont have everything, i want to know exactly what i need?
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
engine, loom with everything ecu immbo ring transponder chip
if Spi need Mpi fuel pump
mounts
exhaust
rad
|
mrmattholmes
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 28th Sep 06
Location: Thirsk,North Yorkshire,UK
User status: Offline
|
thanks mate
|
Richie B
Member
Registered: 18th Apr 04
Location: Newcastle
User status: Offline
|
rad from 1.2 will be ok imo?
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
some rads are different, and require different hoes, may be fine, may not
|
sand-eel
Member
Registered: 15th Mar 07
Location: carluke/braidwood--IRNBRULAND
User status: Offline
|
might need the clocks out the 1.4 sport aswell
|
mrmattholmes
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 28th Sep 06
Location: Thirsk,North Yorkshire,UK
User status: Offline
|
would it be easier puttin a 1.6/1.4 8valve in?
|
Richie B
Member
Registered: 18th Apr 04
Location: Newcastle
User status: Offline
|
Possibly. The 16v won't be particularly difficult though.
Do you not have the engine already? If not, then as I said earlier, buy one with everything with it, ie hubs etc, and all you need to do is mount onto existing mounts, change fuel pump and sort the clocks (did mine with existing clocks but can't remember how we/my mates sorted the drive as I don't know that stuff)
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
dont need different hubs
as you dont change the gearbox
and standard clocks are fine - as you dont change the gearbox
|
Sean-B
Member
Registered: 1st May 07
Location: Wolverhampton Drives: 200SX S14a
User status: Offline
|
would a 1.28v gearbox be ok an a 1.6 16v?
|
luke85
Member
Registered: 26th Nov 07
Location: Chesterfield
User status: Offline
|
Yes it will be ok buit you can fit the 1.6 gearbox and use the 1.2 shafts and clocks if you prefer
|
Sean-B
Member
Registered: 1st May 07
Location: Wolverhampton Drives: 200SX S14a
User status: Offline
|
does the 16v gearbox not have elctric drivin clocks?
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
all depends on year not engine
most the gearboxs are the same weather a 1.0 or 1.6
|