Ricky352
Member
Registered: 6th Apr 07
Location: Lisburn, N.I.
User status: Offline
|
Was trying to remove the torx head bolts from the seat subframes but because they were that crap and old they just rounded off. Now nothing will grip in them. Ive tried hammering bigger heads in too but with no joy.
Cheers
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
Any room to get a hammer and a good chisel in?
|
FlaFFy_91
Premium Member
Registered: 30th Sep 08
Location: Formby, Merseyside
User status: Offline
|
erm
hammer and a chisel like alan ses
or drill them through and put new bolts in?
|
Mikey Red B
Member
Registered: 23rd Feb 09
User status: Offline
|
i took an angle grinder to the nut thats tacked on the underneath of the chassy, once that chopped off they soon popped out
|
am4nf
Member
Registered: 27th Jul 08
Location: South Ayrshire Drives: Corsa Sport
User status: Offline
|
this happened to me when i was tqaking the plastic sill trim off to get into the seat pertensioner, i just cut the plastic off, although this would be hard if its the ones holding the subframes down
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
I stuck a drill on mine from the underside and the bolt spun itself out
|
davieslim
Member
Registered: 15th Sep 08
Location: Glasgow City
User status: Offline
|
is it the outside seatbolt that goes through the tensioner as well? if it is then theres a tiny captive nut on the underside of the floor, cut that off and replace it with a toughened nut and bolt with nylon top, there an arse as the pick up all the rod crap
davie
|