john_c20xe
Member
Registered: 10th Feb 08
Location: Eastbourne, EastSussex
User status: Offline
|
hello seen some cams for my engine, just need to know how much lift i can go for on standered pistons?
http://www.motorsportworld.co.uk/frame-detail.asp?PAGE=/manranges.asp
thats the link for the cams i was looking at
[Edited on 18-11-2008 by john_c20xe]
|
Steve X16XE
Member
Registered: 31st Dec 06
Location: Barnsley, South Yorkshire
User status: Offline
|
Can see any cams on that page.
I'm getting Newman 264cams. They are about £300. What sort of overall power are you looking for?
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
newmans are a very good cams. 264's are about the max on stock pockets too, so jst turn over by hand when done timing to make sure not touching tops of pistons.
tbh i wouldnt of thought be too much to gain from a cam as mild as that. the stock corsa gsi cams are good to peak about 7.5k iirc
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
Catcams are similar price also
|
john_c20xe
Member
Registered: 10th Feb 08
Location: Eastbourne, EastSussex
User status: Offline
|
how much are a set of newmans cams?
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
i can supply newman cams at £300+vat a pair.
were a newman dealer, very good cams
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
or go direct to newmans same price
|
john_c20xe
Member
Registered: 10th Feb 08
Location: Eastbourne, EastSussex
User status: Offline
|
ooo i myte take you up on that broster will hav to chek the bank next week, is it just cams like a kit or something?
also my pistons are standard so wat cams do u recommend? cheers
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
id recommend the newman 264 duration cams, they fit straight in
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
broster - how your corsa doing? read about the motor on VS, but not heard/read much else.
john - what other mods have you/are you doing?
|
john_c20xe
Member
Registered: 10th Feb 08
Location: Eastbourne, EastSussex
User status: Offline
|
well its pretty much standard, engine wise i have a replica manzel inlet, 421 manifold, decat and straitthrew exhaust, wana stay with the 1.6 engine as nearlly everyone near me where i live has a redtop or let in something,
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
264s should compliment it well then.
i used to run a c16xe with lightened/balanced bottom end. 80mm pistons pocketed, inlet, stock airbox, ported/polished head, full manifold/system and used to whip 106 gti's valver corsas...obv to a certain point.
but broster will probably agree, there cracking motors
|
john_c20xe
Member
Registered: 10th Feb 08
Location: Eastbourne, EastSussex
User status: Offline
|
next year when xmas has past im planning to find just a bottom end and get sum forged pistons and a quality fresh rebuild done so i can mod the ngine knowing someing isnt guna fuk up on me, thats the problem ive had so far, blown the headgasket little while back and just last week the spark plug melted on clinder one and bent an exhaust valve, lucky enuff i had a spare exhaust valve so it was cheap to fix but jus wana do more stuff to it
|
john_c20xe
Member
Registered: 10th Feb 08
Location: Eastbourne, EastSussex
User status: Offline
|
what are the 80mm pistions? are they bigger? forged?
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
broster is handy lad to have a chat too then. or i could try help out with anything too, depending how far you want to go/spend
|
john_c20xe
Member
Registered: 10th Feb 08
Location: Eastbourne, EastSussex
User status: Offline
|
yeh i was going to get the bodywork sorted out but theres no point reli yet, myte aswell gget the engine going good.
it goes pretty well at the mo, but obviously not quik enuff
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
if you need bits i can supply everythng for a 1.6 16v
philip2, its all mot's and mapped to 5k so i can run it in, but i just havnt had time to use it!
|
richard_cooper
Member
Registered: 31st Jan 07
Location: Mansfield, Nottingamshire
User status: Offline
|
This threat has been good for me as im looking for cams. £300 + vat is a good price.
Do you have to have vernier pulleys ?
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
its better to have them if you fit performance cams, but if your on standard management your limited to dblis verniers as they are the only ones with the lugs for the standard cam sensor
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
john - oversized forged. i sold the engine to a lad in scotland to go into a mini
broster - remember you saying thats mapped to 5k, id be gutted that didnt have time to run it in.
|
john_c20xe
Member
Registered: 10th Feb 08
Location: Eastbourne, EastSussex
User status: Offline
|
ok will have a think about it cheers
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
quote: Originally posted by philip2
john - oversized forged. i sold the engine to a lad in scotland to go into a mini
broster - remember you saying thats mapped to 5k, id be gutted that didnt have time to run it in.
it is mapped to 5k, it took 2 years to build it im in no rush to run it in
|