alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
As title, got a new ecu and loom fitted to the motor at the weekend but I'm getting no spark when I'm turning it over. The coil's getting the correct voltage and the lead from the coil to the dis cap is getting 12v as well. Bought and fitted a brand new rotor arm and distributor cap but it made no difference. Anyone any ideas?
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
Are you getting a pulse from the cap if you test it there? If you do, and you don't at the plugs, then the leads are at fault.
But, did you check the feed from the coil to the dizzy at the dizzy end of the lead? That would be my bet.
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
Aye mate i'm pretty sure that got checked and the dis cap is getting a pulse. pretty sure the leads were at the cap side too, there's no chance that the leads have all suddenly fucked up though i'd have said
|
