Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Been asking lee mitchell about this and he says it should be fine however a few sensors will need changed to suit .
Anymore information on this ?
Cheers
Gregor
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
no no no no no it cant.
|
ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
mmm technically it could
If you ran the c16xe inlet manifold so you can use the airfilter and dumn the map sensor.
But wouldnt be worth it
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Whys that ?
|
ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
map sensor more reliable than air flow meter imo
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
you can if you put the loom and sensor on, the metal inlet cna stay been done a few times, give the nice 4.5k+ kick in the pants aonly a precotec can deliver.
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
It can still be done though?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
well, anything can be done, but whats the point? just get an x16xe ecu.
you would need the loom, sensors, air flow meter, throttle body is different, knock sensor is different, lambda is different............
|
PaulW
Member
Registered: 26th Jan 03
Location: Atherton, Greater Manchester
User status: Offline
|
apparently 3 different types of ECU for the X16XE in the corsa...
mechanic I know had trouble finding one to match the engine... 3 ECU's for same engine, all different part numbers...
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
As said, it's airflow meter, knock, lambda, loom and ecu.
you'd have to buy a whoel c16XE really and then get the bits you wanted off.
The TB's are different as the c16 nly has botl access form below, which is very very gehy when taking the inlet off. but you can use the x16XE TB and inlet so that's not an issue.
|
